|
Size: 12516
Comment:
|
Size: 13139
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 153: | Line 153: |
| Mail is received, routed, and queued by `master(8)`. Set `myhostname` and `mydomain` to the fully-qualified names. |
Set `myhostname` and `mydomain` to the fully-qualified names. Set `mydomains` to the set of all 'trusted' networks. Set `mydestination` to the set of all domains that should be considered 'local'. |
| Line 160: | Line 158: |
| }}} | mynetworks = 127.0.0.0/8, 10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16 mydestination = $myhostname $mydomain www.$mydomain localhost localhost.localdomain }}} By default mail is only accepted... * from clients in trusted networks (`$mynetworks`) * from clients that authenticated with SASL * for remote addresses matching `$relay_domains` * for local addresses found in `$mydestination` (defaulting to `$myhostname`, `localhost.$mydomain`, and `localhost`) To adjust restrictions, try configuring `smtpd_relay_restrictions` or (the older and less-preferred method) `smtpd_recipient_restrictions`. |
| Line 171: | Line 180: |
| mydestination = www1.$mydomain localhost localhost.localdomain |
Postfix
postfix(1) is an SMTP mail transfer agent.
Contents
Installation
Most Linux and BSD distributions offer a postfix package.
For systemd-capable systems, start and enable postfix.service.
For BSD distributions, try:
postfix start
Containers
postfix(1) is designed to be launched from userspace, rather than being a binary that can be invoked in the foreground. However, a new start-fg subcommand was added in version 3.3.
Consider the following Dockerfile as a template.
FROM alpine:latest RUN apk add --no-cache postfix EXPOSE 25 CMD ["postfix", "start-fg"]
To publish this service on an interface like 10.0.0.1, try:
sudo docker build --tag postfix . sudo docker run --detach --name my-postfix \ --restart=always \ --publish 10.0.0.1:25:25 \ postfix
Design
Postfix consists of daemons and queues.
The queues are:
maildrop for local mail posted by sendmail(1)
hold for mail that required administrater intervention
incoming for mail recieved
active for delivery
deferred for mail that temporarily failed to deliver
Local mail sent by sendmail(1) is passed to postdrop(1), which enqueues mail into maildrop. pickup(8) then passes mail from maildrop to cleanup(8).
Received mail, whether by smtpd(8) or qmqpd(8), is passed directly to cleanup(8).
cleanup(8) passes back and forth with trivial-rewrite(8) and enqueues mail into incoming.
qmgr(8) moves mail from incoming into active and deferred, and schedules delivery by any of smtp(8), lmtp(8), local(8), virtual(8), or pipe(8).
master(8) manages all daemons according to the configuration file master.cf (see master(5)). It looks like:
# ==========================================================================
# service type private unpriv chroot wakeup maxproc command + args
# (yes) (yes) (no) (never) (100)
# ==========================================================================
smtp inet n - n - - smtpd
#smtp inet n - n - 1 postscreen
#smtpd pass - - n - - smtpd
#dnsblog unix - - n - 0 dnsblog
#tlsproxy unix - - n - 0 tlsproxy
submission inet n - n - - smtpd
# -o syslog_name=postfix/submission
# -o smtpd_tls_security_level=encrypt
# -o smtpd_sasl_auth_enable=yes
# -o smtpd_tls_auth_only=yes
# -o smtpd_reject_unlisted_recipient=no
# -o smtpd_client_restrictions=$mua_client_restrictions
# -o smtpd_helo_restrictions=$mua_helo_restrictions
# -o smtpd_sender_restrictions=$mua_sender_restrictions
# -o smtpd_recipient_restrictions=
-o smtpd_relay_restrictions=permit
# -o milter_macro_daemon_name=ORIGINATING
smtps inet n - n - - smtpd
# -o syslog_name=postfix/smtps
# -o smtpd_tls_wrappermode=yes
# -o smtpd_sasl_auth_enable=yes
# -o smtpd_reject_unlisted_recipient=no
# -o smtpd_client_restrictions=$mua_client_restrictions
# -o smtpd_helo_restrictions=$mua_helo_restrictions
# -o smtpd_sender_restrictions=$mua_sender_restrictions
# -o smtpd_recipient_restrictions=
# -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
# -o milter_macro_daemon_name=ORIGINATING
#628 inet n - n - - qmqpd
pickup unix n - n 60 1 pickup
cleanup unix n - n - 0 cleanup
qmgr unix n - n 300 1 qmgr
#qmgr unix n - n 300 1 oqmgr
tlsmgr unix - - n 1000? 1 tlsmgr
rewrite unix - - n - - trivial-rewrite
bounce unix - - n - 0 bounce
defer unix - - n - 0 bounce
trace unix - - n - 0 bounce
verify unix - - n - 1 verify
flush unix n - n 1000? 0 flush
proxymap unix - - n - - proxymap
proxywrite unix - - n - 1 proxymap
smtp unix - - n - - smtp
relay unix - - n - - smtp
-o syslog_name=postfix/$service_name
# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq unix n - n - - showq
error unix - - n - - error
retry unix - - n - - error
discard unix - - n - - discard
local unix - n n - - local
virtual unix - n n - - virtual
lmtp unix - - n - - lmtp
anvil unix - - n - 1 anvil
scache unix - - n - 1 scache
postlog unix-dgram n - n - 1 postlogdSome important details to note:
lmtp implies port 24
smtp implies port 25
smtps implies port 465
submission implies port 587
Configuration
Receiving Mail
Set myhostname and mydomain to the fully-qualified names. Set mydomains to the set of all 'trusted' networks. Set mydestination to the set of all domains that should be considered 'local'.
myhostname = www1.example.com mydomain = example.com mynetworks = 127.0.0.0/8, 10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16 mydestination = $myhostname $mydomain www.$mydomain localhost localhost.localdomain
By default mail is only accepted...
from clients in trusted networks ($mynetworks)
- from clients that authenticated with SASL
for remote addresses matching $relay_domains
for local addresses found in $mydestination (defaulting to $myhostname, localhost.$mydomain, and localhost)
To adjust restrictions, try configuring smtpd_relay_restrictions or (the older and less-preferred method) smtpd_recipient_restrictions.
Local Delivery
master(8) interprets these addresses as local: $myhostname, localhost.$mydomain, and localhost. To override this, set mydestination.
Alternatively, see Address Rewriting below and plan to re-route $myhostname.
If mail is destined for the local host, it is queued for local(8) to handle. (Any of bounce(8), defer(8) or trace(8) may then be called.)
The local part of the email address is extracted and casefolded to lowercase.
Mail is delivered to a user-specific folder under mail_spool_directory, i.e. /var/spool/mail/root. (Alternatively, mail can be delivered into users' home directories via home_mailbox.) The following manipulations are made to locally-delivered mail:
prepend a From SENDER DATETIME envelope header
prepend an X-Original-To: header
prepend an Delivered-To: header
prepend a Return-Path: header
prepend a > character to lines beginning with From
- append an empty line
Also, the mailbox is locked while delivery is in progress; if an error occurs, the mailbox is truncated to its original length. Delivery is executed with the permissions of the recipient.
Custom Delivery
A custom delivery command can be provided with mailbox_command_maps or mailbox_command.
In most cases, the command is executed with the recipient's permissions. If the recipient is root, a custom delivery command is executed with default_privs.
Qmail
For qmail-style mailboxes, the value of mail_spool_directory or home_mailbox must end in a forward slash (/).
home_mailbox = Maildir/
The following manipulations are made to locally-delivered qmail-style mail:
prepend a Delivered-To: header
prepend an X-Original-To: header
prepend a Return-Path: header
Forwarding
When attempting delivery, forward_path is scanned for a forward(5) file (i.e. ~/.forward). These looks like:
[email protected] # anything after # is ignored "|/path/to/examplemda"
Forwarded mail is sent as a new message with the Delivered-To: header, to prevent loops.
Note that the second line is only allowable if allow_mail_to_commands is set to:
allow_mail_to_commands = alias,forward,include
The default alias,forward disallows custom commands.
Routing
To route mail based on the recipient domain, try:
transport_maps = lmdb:/etc/postfix/transport
A transport(5) file (i.e. /etc/postfix/transport) looks like:
admin@localhost relay:[smtp.gmail.com]:587 service1.example.com lmtp:unix:/path/to/service.sock example.com lmtp:0.0.0.0:24 .example.com lmtp:0.0.0.0:24 localhost local .localdomain local * relay:[smtp.gmail.com]:587
The first part of each line is a pattern. The second part is an instruction beginning with local, lmtp, smtp, or relay. The local instruction expands to the local_transport setting, which itself defaults to local:$myhostname. Bracketing an address prevents a MX record lookup; the A record alone is looked up and used naively.
Domains prefixed with a dot (.) are a pattern for all subdomains. The example above captures localhost and *.localdomain for local delivery.
The asterisk (*) domain is a fallback route, used only if nothing else matches.
The matching happens in the hierarchical order shown above: by full address, then by full domain part, then by subdomain part, and finally the fallback.
Run postmap /etc/postfix/transport and a hashed file will be produced. If your postmap(1) does not use LMDB, replace the lmdb: with whatever algorithm was used.
Relaying
The relay instruction in a transport(5) file causes mail to be relayed to another SMTP server.
Use of a relay server often requires authentication and encryttion. Try:
smtp_sasl_auth_enable = yes smtp_sasl_security_options = noanonymous smtp_sasl_password_maps = lmdb:/etc/postfix/sasl/sasl_passwd smtp_tls_security_level = encrypt smtp_tls_CAfile = /etc/ssl/certs/ca-certificates.crt
/etc/postfix/sasl/sasl_passwd should look like:
[smtp.gmail.com]:587 [email protected]:wwwwxxxxyyyyzzzz
Run postmap /etc/postfix/sasl/sasl_passwd and a hashed file will be produced. If your postmap(1) does not use LMDB, replace the lmdb: with whatever algorithm was used.
Address Rewriting
To rewrite addresses as they are received, try:
smtp_generic_maps = lmdb:/etc/postfix/generic
A generic(5) file (i.e. /etc/postfix/generic) looks like:
root@localdomain [email protected] root [email protected] @localdomain [email protected]
The first part of each line is a pattern. The second part is the address that overwrites a matching address.
Note the second line only rewrites addresses using a domain in $myorigin, $mydestination, $inet_interfaces, or $proxy_interfaces. The matching also happens in that hierarchical order: by full address, then by local part, then by domain part.
Run postmap /etc/postfix/generic and a hashed file will be produced. If your postmap(1) does not use LMDB, replace the lmdb: with whatever algorithm was used.
Posting Mail
master(8) expects mail posted locally to use $myhostname as the sender's domain. To override this, set myorigin.
myorigin = $mydomain
Administration
Testing the service
Install mailx and send an empty email.
To test mail relay to external hosts, try:
mail -s 'Test Email' '[email protected]' </dev/null
Alternatively, try using telnet.
Reviewing the queue
Two useful administrative utilities exist for reviewing the mail queue: postqueue(1) and postcat(1).
To view the mail queue, try:
postqueue -p
This will display the queued messages, the senders and recipients, and a mail ID.
To force all queued mail to be sent now, run:
postqueue -f
To instead force a singular message to be send now, run:
postqueue -i MAILID
To instead inspect a message in the queue, try:
postcat -vq MAILID